Showing results 21 to 38 of 38
< previous
| Issue Date | Title | Author(s) |
| 2014 | Investigation of the penetration behavior of alsi7 foam, produced by powder metallurgy method, under low-velocity impact energies | Çinici, Hanife; Gökmen, Uğur; Uzun, Arif; Karakoç, Halil; Göde, Ceren ; Türker, Mehmet |
| 2022 | Machinability of pure copper before and after processing by severe plastic deformation method | Ozkavak, H. Varol; Gode, C. |
| 2013 | Mechanical properties of hot pressed SiCp and B4Cp/Alumix 123 composites alloyed with minor Zr | Göde, Ceren |
| 2022 | Melt refining and purification processes in Al alloys: a comprehensive study | Wu, Jianxin; Djavanroodi, Faramarz; Gode, Ceren ; Attarilar, Shokouh; Ebrahimi, Mahmoud |
| 2014 | Microstructural refinement and wear property of Al-Si-Cu composite subjected to extrusion and high-pressure torsion | Göde, Ceren ; Yilmazer, H.; Ozdemir, I.; Todaka, Y. |
| 2022 | Microstructure evolution, texture development, and mechanical properties of hot-rolled 5052 aluminum alloy followed by annealing | Wu, Jianxin; Djavanroodi, Faramarz; Gode, Ceren ; Ebrahimi, Mahmoud; Attarilar, Shokouh |
| 2017 | Molecular imprinting polymer with polyoxometalate/carbon nitride nanotubes for electrochemical recognition of bilirubin | Yola, M.L.; Göde, Ceren ; Atar, Necip |
| 2013 | Numerical prediction of the effects of material properties on strain behavior during equal channel angular pressing | Ebrahimi, M.; Djavanroodi, F.; Göde, Ceren ; Nikbin, K.M. |
| 2014 | Preparation and evaluation of cerium oxide-bovine hydroxyapatite composites for biomedical engineering applications | Gunduz, O.; Göde, Ceren ; Ahmad, Z.; Gökçe, H.; Yetmez, M.; Kalkandelen, C.; Sahin, Y.M. |
| 2021 | Prototype Design and Manufacture of the New Generation Highly Automated Brushing Machine in Home Textile | Ertuna, İlker; İnalöz, Mustafa; Yoldaşoğlu, Nazlı; İpek, Fatma; Atar, Aslı; Küçükpetek, Ali; Göde, Ceren |
| 2017 | Severely deformed copper by equal channel angular pressing | Ebrahimi, M.; Göde, Ceren |
| 2019 | The synergistic effect of dilute alloying and nanostructuring of copper on the improvement of mechanical and tribological response | Ebrahimi, M.; Shaeri, M.H.; Göde, Ceren ; Armoon, H.; Shamsborhan, M. |
| 2020 | Tailoring twist extrusion process; the better strain behavior at the lower required loads | Attarilar, S.; Göde, Ceren ; Mashhuriazar, M.H.; Ebrahimi, M. |
| 2024 | Thermal treatments of titanium- and nickel-based alloys processed by powder bed fusion technology | Zhang, Nannan; Kandavallı, Sumanth Ratna; Göde, Ceren ; Kong, Hui; Attarilar, Shokouh; Ebrahimi, Mahmoud; Kandavalli, Sunanda Ratna; Shamsborhan, Mahmoud; Jafarzadeh, Hossein; Jannet, Sabitha |
| 2016 | TiO 2 -SiO 2 Nanokompozit Üretimi ve Deri Finisajında Kullanımı ile Derinin Bazı Performans Özelliklerinin Geliştirilmesi | Koızhaıganova, Meruyert; Göde, Ceren ; Arslan, Ahmet |
| Jul-2011 | TM ile üretilmiş Alumix-231 SiCp ve B4Cp kompozitlerin farklı üretim yöntemlerinin mekanik özelliklere etkisi | Göde, Ceren |
| 2014 | TOZ METALURJİSİ YÖNTEMİYLE ÜRETİLEN AlSi7 KÖPÜKLERİN DÜŞÜK HIZLI DARBE ENERJİLERİ ALTINDA PENETRASYON DAVRANIŞININ İNCELENMESİ * | Çinici, Henifi; Gökmen, Uğur; Uzun, Arif; Karakoç, Halil; Göde, Ceren ; Türker, Mehmet |
| 2014 | Wear properties of brass samples subjected to constrained groove pressing process | Ebrahimi, M.; Attarilar, S.; Djavanroodi, F.; Göde, Ceren ; Kim, H.S. |
