10.07. Mechanical Engineering

Organization name
10.07. Mechanical Engineering
Director
City
Denizli
Country
Turkey

OrgUnit's Researchers publications
(Dept/Workgroup Publication)

Results 181-200 of 508 (Search time: 0.028 seconds).

Issue DateTitleAuthor(s)
1812016Experimental investigation of aluminum matrix functionally graded material: Microstructural and hardness analyses, fretting, fatigue, and mechanical propertiesUluköy, Arzum; Topçu, Muzaffer ; Tasgetiren, S.
1822019Experimental investigation of buckling loads of glass/epoxy composites modified with nanoparticlesDindar, Berkant; Bektaş, Numan Behlül 
1832012Experimental investigation of cooling with multiple air jets on auto glass temperingGölcü, M.; Yazici, H.; Akçay, Mehmet ; Köseoglu, Mehmet Fevzi ; Sekmen, Y.
42017Experimental investigation of effectiveness of heating tube with conical bafflesYakar, Gülay 
52018Experimental investigation of fatigue and mechanical properties of unidirectional composite plates filled nanoparticlesDindar, B.; Bektaş, Numan Behlül 
62018Experimental investigation of forced convection heat transfer over horizontal tube with conical fins for different fin spacings and different inclination anglesYakar, Gülay 
72022Experimental investigation of single-lap bolted and bolted/bonded (hybrid) joints of polymeric platesDindar, Berkant; Agir, İnan ; Çallıoğlu, Hasan 
82011Experimental investigation of the cooling performance of a ground source heat pump system in Denizli, TurkeyKarabacak, R. ; Güven Acar, E.; Kumsar, Halil ; Gökgöz, Ali ; Kaya, M.; Tülek, Yahya 
92022Experimental investigation of the effect of crosslinking fibers on mechanical properties of deer's antlersTuncer, Can; Orhan, Mehmet 
102021Experimental investigation of the effect of different waveforms on heat transfer in a thermoacoustic coolerGokay, Ilker; Karabacak, Rasim 
112018Experimental investigation of thin films with various overprints used for packaging labelsSzusta, J.; Karakaş, Özler ; Tomczyk, A.
122015Experimental investigation of transient temperature distribution and heat transfer by jet impingement in glass tempering processingYazıcı, Hilmi; Akçay, Mehmet ; Gölcü, Mustafa ; Köseoğlu, Mehmet Fevzi ; Sekmen, Y.
132010An experimental investigation on the impact behavior of hybrid composite platesSayer, Metin ; Bektaş, Numan Behlül ; Sayman, O.
142015Experimental investigations of thermal conductivity, thermal degradation and fire resistance of rigid polyurethane foams filled with nano calcite and intumescent flame retardantAydogan, B; Usta, Nazım 
152011Experimental performance evaluation of a PV-powered refrigeration systemEkren, O.; Yılancı, Ahmet; Çetin, Engin ; Özturk, Harun Kemal 
162015Experimental performance evaluation of combi-heaters with different heat exchanger unitKöseoğlu, Mehmet Fevzi ; Baskaya, S; Calisir, T
171996Experimental relationships for heat flux, Nusselt number and temperature difference in a finned heaterKarabacak, Rasim 
182024An experimental study of weave pattern effect on the mechanical and dynamic behavior of composite laminatesHalimi, Rafik; Rekbi, Fares Mohamed Laid; Mimouni, Oussama; Özbek, Özkan ; Djerir, Wahiba; Rezzoug, Amine
192008An experimental study on improvement of a Savonius rotor performance with curtainingDeda Altan, Burçin ; Atılgan, Mehmet ; Özdamar, A.
202023An experimental study on low velocity impact characteristics of glass fiber reinforced epoxy nanocompositesYılmaz, Yasin ; Özgül, Fatih; Ağır, İnan