Please use this identifier to cite or link to this item:
https://hdl.handle.net/11499/46315
Title: | Filter life comparison of different levels of nanofiber coated cleanable-surface filter for gas tribunes | Authors: | Akduman, Cigdem Demirel, Volkan Tezcan, Fatma |
Keywords: | filter life filtration gas tribunes nanofibers surface filters |
Publisher: | Wiley | Abstract: | High-efficiency air filtration is a basic requirement for the most cost-effective operation of high-efficiency gas turbines. The filtration system protects the gas turbine from damaging debris. In gas turbine/dust collector applications, higher efficiency filtration could be achieved with nanofibers, which provide higher equipment protection than traditional media. With a nanofiber performance filter layer, the dust accumulates on the surface of the filtration media rather than within the media and could be cleaned off easily with a back pulse resulting in long filter life and a low-operating pressure drop. In this study five type of gas tribune nanofiber coated corrugated cellulose/synthetic filter media were developed. Nanofiber coating was adjusted for five filtration efficiency level, 50 <= E < 60, 60 <= E < 70, 70 <= E < 85, 85 <= E < 95 and 95 <= E, pore size and filter-life of the developed media were evaluated. One of the developed nanofiber coated media was also compared with two other commercial nanofiber coated gas tribune filter media, a glass fiber type filter media and a commercial fine fiber gas tribune filter media. It was seen that, with decreasing penetration levels due to nanofiber coating level, initial 30 cycle durations of filter life evaluation could reach about 229.9 to 250.7 min. Highest final cycle duration of 188.7 min belonged to cellulose/synthetic blend corrugated filter media with penetration of 13.66%. Nanofiber based surface filter media was cleaned up better than fine fiber media and final 30 cycle sequences were significantly higher. Surface of the nanofiber coated media was smoother when compared to fine fiber media and during the initial and final cycle test dust could not penetrate inside and could not hang to this smooth surface. So, with back pulse cleaning cake releasing have performed easily. It was also seen that, for higher filter life nanofiber coating should be uniform and robust to back pulse cleaning. | URI: | https://doi.org/10.1002/app.50820 https://hdl.handle.net/11499/46315 |
ISSN: | 0021-8995 1097-4628 |
Appears in Collections: | Denizli Teknik Bilimler Meslek Yüksekokulu Koleksiyonu Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection |
Show full item record
CORE Recommender
SCOPUSTM
Citations
3
checked on Dec 14, 2024
WEB OF SCIENCETM
Citations
1
checked on Dec 19, 2024
Page view(s)
40
checked on Aug 24, 2024
Google ScholarTM
Check
Altmetric
Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.