Please use this identifier to cite or link to this item: https://hdl.handle.net/11499/50588
Title: The effect of boric acid on flame retardancy of intumescent flame retardant polypropylene composites including nanoclay
Authors: Demirhan, Yasin
Yurtseven, Recep
Usta, Nazım
Keywords: Boric acid
clay
intumescent flame retardant
mechanical properties
polypropylene
Boride coatings
Differential scanning calorimetry
Flame resistance
Nanocomposites
Polypropylenes
Smoke
Tensile strength
Thermal conductivity
Thermogravimetric analysis
Ammonium polyphosphates
Flame retardant system
Flame-retardancy
Flame-retardant polypropylene
Intumescent flame retardant
Limiting Oxygen Index
Metaboric acid
Montmorillonite nanoclay
Nano clays
Polypropylene composite
Boric acid
Publisher: SAGE Publications Ltd
Abstract: In this study, different amounts of boric acid (BA, 1.25, 2.5, 3.75 and 5.0 wt%) were used to enhance the effectiveness of an intumescent flame retardant (IFR) system composed of ammonium polyphosphate (APP) and pentaerythritol (PER) in polypropylene (PP) including 2 wt% montmorillonite nanoclay (MMT). Meanwhile, metaboric acid and boron oxide which were generated by the decomposition of BA appeared in the melt compounding and the burning processes, respectively. Extensive experimental studies were performed to investigate the effects of BA/boron oxide and MMT combinations on the properties of PP/IFR. The fire resistances of the composites were studied by UL 94, limiting oxygen index (LOI) and cone calorimetry tests. The thermal properties were determined by using thermogravimetric analysis, differential scanning calorimetry and thermal conductivity measurements. In addition, the mechanical properties of the composites were examined. The experimental results revealed that although the additions of 1.25 and 2.5 wt% BA with 2 wt% MMT significantly enhanced thermal and flame resistances of PP composites, 3.75 and 5.0 wt% BA additions generated antagonistic effects and deteriorated the fire resistance of the composites. The sample including 2.5 wt% BA addition achieved the best flame retardancy. The LOI value was increased from 18 to 31% with UL 94 V-0 rating. In addition, the peak heat release rate was reduced from 668.6 to 150.0 kW/m2 and the total heat release value was decreased from 247.9 to 98.4 MJ/m2. In the meantime, the thermal conductivity was increased from 0.22 up to 0.28 W/mK. Furthermore, CO, CO2 and the smoke productions were significantly decreased with respect to PP. NO generation was decreased with BA replacements. At the same time, although there was a slight decrease in the tensile strength, the flexural strength significantly increased with BA and MMT additions. © The Author(s) 2021.
URI: https://doi.org/10.1177/08927057211052327
https://hdl.handle.net/11499/50588
ISSN: 0892-7057
Appears in Collections:Mühendislik Fakültesi Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Show full item record



CORE Recommender

SCOPUSTM   
Citations

22
checked on Nov 16, 2024

WEB OF SCIENCETM
Citations

21
checked on Nov 21, 2024

Page view(s)

82
checked on Aug 24, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.