Please use this identifier to cite or link to this item: https://hdl.handle.net/11499/5824
Title: Effects of geometric parameters on failure behavior in joined-rivet and single lap laminated composite plate under bending moment
Authors: Ergun, Sefa
Karakaya, Ş.
Tarakçilar, A.R.
Ergun, E.
Keywords: Glass-epoxy material
Rivet connection
Rivet geometry
Three-point bending test
Abstract: In this study, failure behavior of single lap composite plate fixed by means of both rivets and adhesive bonding was investigated using three-point bending test. Rivet connections were made on specimens at different geometrical intervals. Force-displacement graph were drawn. The composites used were made of glass epoxy materials with four plies and 0° layer angle. An FM73 film layered binder was used for binding process, whereas riveting was done with a 5 mm diameter dome shaped rivets. The bending test model was performed using Abaqus 6.9.1, finite element analysis software. After the three-point bending tests, the failure behavior obtained experimentally was compared with that obtained with numerical analysis. The failure behavior obtained experimentally was compared with that obtained with numerical analysis. In addition, two different failure criteria (Tsai-Wu and Tsai-Hill) were used for the composite test specimens and the failures that occurred in each layer were determined. © 2011 Academic Journals.
URI: https://hdl.handle.net/11499/5824
https://doi.org/10.5897/SRE10.1075
ISSN: 1992-2248
Appears in Collections:Mühendislik Fakültesi Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Show full item record



CORE Recommender

Page view(s)

24
checked on Aug 24, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.