Please use this identifier to cite or link to this item:
https://hdl.handle.net/11499/9716
Title: | Optimum BET surface areas for activated carbon produced from textile sewage sludges and its application as dye removal | Authors: | Kaçan,Erdal | Keywords: | Adsorption Dye Experimental design method Textile sewage sludge Textile sewage sludge activated carbon activated carbon carbon dye hydrogen nitrogen oxygen potassium hydroxide sulfur charcoal coloring agent hydroxide potassium derivative sewage waste water water pollutant adsorption aqueous solution experimental design experimental study inorganic compound methodology pyrolysis sludge surface area temperature effect textile industry Article chemical bond chemical composition chemical parameters concentration (parameters) controlled study energy cost high temperature procedures microanalysis molecular weight response surface method stretching time vibration waste component removal chemistry isolation and purification procedures surface property temperature textile Turkey water management Charcoal Coloring Agents Hydroxides Potassium Compounds Sewage Surface Properties Temperature Textiles Waste Water Water Pollutants, Chemical Water Purification |
Publisher: | Academic Press | Abstract: | The purpose of this experimental study is to determine optimum preparation conditions for activated carbons obtained from textile sewage sludge (TSS) for removal of dyes from aqueous solutions. The textile sewage sludge activated carbon (TSSAC) was prepared by chemical activation with potassium hydroxide using Response Surface Methodology (RSM). The most influential factor on each experimental design responses was identified via ANNOVA analysis. Based on the central composite design (CCD), quadratic model was developed to correlate the preparation variables for one response which is the Brunauer-Emmelt-Teller (BET) surface area. RSM based on a three-variable CCD was used to determine the effect of pyrolyzed temperature (400-700 °C), carbonization time (45-180 min) and KOH: weight of TSS (wt%) impregnation ratio (0.5:1-1.5:1) on BET surface area. According to the results, pyrolyzed temperature and impregnation ratio were found as the significant factors for maximizing the BET surface area. The major effect which influences the BET surface area was found as pyrolyzed temperature. Both carbonization time and impregnation ratio of KOH had no significant effect. The optimum conditions for preparing TSSAC, based on response surface and contour plots, were found as follows: pyrolyzed temperature 700 °C, carbonization time of 45 min and chemical impregnation ratio of 0.5. The maximum and optimum BET surface area of TSSAC were found as 336 m2/g and 310.62 m2/g, respectively. Synozol Blue reactive (RSB) and Setapers Yellow-Brown (P2RFL) industrial textile dyes adsorption capacities were investigated. As expected the TSSAC which has the biggest BET surface area (336 m2/g) adsorbed dye best. The maximum (RSB) and (P2RFL) uptake capacities were found as 8.5383 mg/g and 5.4 mg/g, respectively. The results of this study indicated the applicability of TSSAC for removing industrial dyes from aqueous solution. © 2015 Elsevier Ltd. | URI: | https://hdl.handle.net/11499/9716 https://doi.org/10.1016/j.jenvman.2015.09.044 |
ISSN: | 0301-4797 |
Appears in Collections: | Fen-Edebiyat Fakültesi Koleksiyonu PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection |
Show full item record
CORE Recommender
SCOPUSTM
Citations
120
checked on Nov 23, 2024
WEB OF SCIENCETM
Citations
114
checked on Nov 22, 2024
Page view(s)
18
checked on Aug 24, 2024
Google ScholarTM
Check
Altmetric
Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.