| Issue Date | Title | Author(s) |
| 2019 | 3B Yazıcı ile PLA Malzemeden Üretilmiş İnce Kirişlerin Yazdırma Yönelim Açısının Doğal Frekansa Etkisi | Tezel, Tuğçe; Atlıhan, Gökmen ; Kovan, Volkan; Topal, Eyüp Sabri |
| 2022 | Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel | Onar, Volkan ; Sulak, Mine ; Öz, Hakan; Işıtan, Arzum ; Ali, Yusuf Abdulkadir |
| 2018 | AISI 4140 Çeliğine Uygulanan Sığ Kriyojenik İşleminin Mekanik Özellikler Üzerindeki Etkisi | Kızılkaya, Eşref; Ovalı, İsmail |
| 2018 | AISI D2 Soğuk İş Takım Çeliğine Uygulanan Endüstriyel Kriyojenik İşlemin Aşınma Davranışları Üzerindeki Etkisi | Ersöz, Enes; Ovalı, İsmail |
| 2020 | Ayak, ayak bileği, diz, kalça ortezi (hkafo) üzerinde iyileştirme çalışmaları | Çakmak, Funda; Kutlubay, Ramazan Çağrı ; Demirel, Yasemin; Işıtan, Arzum |
| 2022 | Bioplastics / Biopolymers: How Aware Are We? | Işıtan, Arzum ; Gök, Cem ; Sulak, Mine ; Kırmızı, Fatma ; Onar, Volkan ; Kutlubay, Ramazan Çağrı |
| 2020 | Bir KBRN Tespit Kara Taşıtı Üzerinde İyileştirme Çalışmaları | Çarpan, Abdullah; Kutlubay, Ramazan Çağrı ; Kaşıkçıoğlu, Savaş; Şahin, Murat ; Karatay, Osman Kaan; Etiz, Ali; Işıtan, Arzum |
| 5-Feb-2019 | Borlama işleminin Vanadis 4 çeliğinin aşınma direnci üzerine etkisi | Kutlubay, Ramazan Çağrı ; Işıtan, Arzum ; Gürcan, Yasin |
| 2019 | Boro-sinterleme işleminin ham T/M parçaların mikroyapı ve sertlik özelliklerine etkilerinin incelenmesi | Aksöz, Sinan ; Kaplan, Yavuz ; Tan, Engin |
| 2013 | Buckling analysis of delaminated composite beams | Atlıhan, Gökmen |
| 2007 | Calculation of residual stresses resulting from bending of cold formed steel bars | Atlihan, G ; Topcu, M ; Callioglu, H ; Altan, G |
| 2023 | Comparative Analysis of Minimum Chip Thickness, Surface Quality and Burr Formation in Micro-Milling of Wrought and Selective Laser Melted Ti64 | Karakılınç, Ucan; Ergene, Berkay ; Yalçın, Bekir; Aslantaş, Kubilay; Erçetin, Ali |
| 2023 | A comparative analysis of the effect of post production treatments and layer thickness on tensile and impact properties of additively manufactured polymers | Bolat, Cagin; Ergene, Berkay ; Ispartalı, Hasan |
| 2024 | A comparative experimental work on the drop-weight impact responses of thermoplastic polymers produced by additive manufacturing: combined influence of infill rate, test temperature, and filament material | Bolat, Cagin; Çebi, Abdulkadir; Ispartalı, Hasan; Ergene, Berkay ; Aslan, Muhammed Turan; Göksüzoğlu, Mert |
| 2010 | Comparison of drying characteristics of tomatoes with heat pump dehumidifier system, solar-assisted system and natural drying | Karabacak, Rasim ; Atalay, Öner |
| 2019 | Comparison of the effects of b4C and SiC Reinforcement in Al-Si Matrix Alloys Produced via PM Method | Kaplan, Y. ; Tan, Engin. ; Ada, H.; Aksöz, Sinan. |
| 2023 | A comprehensive investigation of drilling performance of anisotropic stacked glass-carbon fiber reinforced hybrid laminate composites | Ergene, Berkay ; Bolat, Çağın; Karakılınç, Ucan; Irez, Alaeddin Burak |
| 2023 | A Cross-Cultural Analysis for Plastic Waste Perception of Students from Romania and Turkey | Boca, Gratiela Dana; Işıtan, Arzum ; Çağlarer, Evren; Saraçlı, Sinan |
| 2021 | ÇATLAK DERİNLİĞİNİN VE FİBER AÇISININ KARBON FİBER TAKVİYELİ POLİMER KOMPOZİT KİRİŞİN TİTREŞİM DAVRANIŞINA ETKİSİNİN SONLU ELEMANLAR ANALİZİ YÖNTEMİ İLE BELİRLENMESİ | Ergene, Berkay |
| 5-Feb-2019 | Determination of microstructure and microhardness properties of Boronized Vanadis 4 steel | Gürcan, Yasin; Işıtan, Arzum ; Kutlubay, Ramazan Çağrı |
| 2020 | Determination of optimum insulation thickness for building external walls with different insulation materials using environmental impact assessment | Dombayci, OA ; Ulu, EY; Guven, S; Atalay, O ; Ozturk, HK |
| 2019 | Determination of thermal performance of a solar collector by using dynamic test method | Yilanci, A; Atalay, Öner ; Kocar, G; Eryasar, A |
| 2020 | Determination of thermal stress and elongation on different ceramic coated ti-6al-4v alloy at elevated temperatures by finite element method | Ergene, Berkay ; Bolat, C |
| 2020 | The effect of aging processes on tribo-metallurgy properties of al based ternary alloys product by p/m technique | Kaplan, Yavuz ; Aksöz, Sinan ; Ada, H.; İnce, E.; Özsoy, S. |
| 2019 | Effect of current and welding time on tensile-peel strength of resistance spot welded TWIP 1000 and martensitic steels | Onar, Volkan ; Özen, F.; Kekik, M.; Aslanlar, Y.S.; Özderin, Y.; Aslan, H.; Aslanlar, S. |
| 2023 | Effect of Different Application Pressures on Rotary-Friction-Welded Aa2024-T6 Joints | Apay, S.; Özen, F.; Onar, Volkan |
| 2023 | Effect of Drilling Parameters and Tool Geometry on the Thrust Force and Surface Roughness of Aerospace Grade Laminate Composites | Bolat, Ç.; Karakılınç, U.; Yalçın, B.; Öz, Y.; Yavaş, Ç.; Ergene, B. ; Erçetin, A.; Akkoyun, Fatih |
| 2018 | Effect of Gr Contents on Wear Properties of Al2024/MgO/Al2O3/Gr Hybrid Composites | Ovalı, İsmail ; Esen, C.; Albayrak, S.; Karakoç, H. |
| 2023 | The Effect of Hot Rolling Temperature on the Wear Properties of NiTi Rods | Aksoz, Sinan ; Arslan, Ridvan; Kardes Sever, Nimet ; Kaplan, Yavuz ; Bostan, Bulent |
| 2019 | The effect of nugget sizes on tensile peel loading in resistance spot welding of dp800 and twip950 steel sheets used in automative industry | Onar, Volkan. ; Ferik, E.; Acar, İ.; Şıkşık, V.; Varol, F.; Özsaraç, U.; Aslanlar, S. |
| 2020 | The Effect of Oxidation Process After Nitrocarburization on Tribological Properties of AISI 4140 Steel | Kaplan, Yavuz ; Yildirim, A; Aksöz, Sinan |
| 2022 | The Effect of Vacuum Carburizing on the Mechanical and Wear Properties of Fe-C-Cu Composite Materials Produced via Powder Metallurgy | Pamuk, Ozer; Kaplan, Yavuz ; Tan, Engin ; Aksoz, Sinan |
| 2019 | Effect of welding time on tensile-shear load in resistance spot welded TRIP 800 and microalloyed steels | Özsaraç, U.; Onar, Volkan ; Özen, F.; Aslanlar, Y.S.; Akkaş, N. |
| 2021 | Effects of Aging and Deep Cryogenic Treatment on Wear Behavior of Al7075 Alloy | Mavi, Ahmet; Kaplan, Yavuz ; Aksoz, Sinan |
| 2023 | The Effects of Different Heat Treatment Regimes on the Wear Properties of Fe-Based Composite Materials | Pamuk, Ozer; Kaplan, Yavuz ; Aksoz, Sinan |
| 2015 | The effects of process parameters on acceleration amplitude in the drilling of cold work tool steels | Kaplan, Yavuz ; Motorcu, Ali Rıza; Nalbant, Muammer; Okay, Şenol |
| 2018 | The effects of the industrial cryogenic process on the wear behaviours of AISI D2 cold work tool steels | Ersöz, Enes; Ovalı, İsmail |
| 2021 | EKLEMELİ İMALAT YÖNTEMİYLE ÜRETİLMİŞ BAL PETEKLİ YAPILARIN TİTREŞİM DAVRANIŞLARININ NÜMERİK VE DENEYSEL OLARAK İNCELENMESİ | Atlıhan, Gökmen ; Ovalı, İsmail ; Eren, Abdullah |
| 2006 | Energy and exergy analysis of kizildere geothermal power plant, Turkey | Özturk, Harun Kemal. ; Atalay, Öner. ; Yılancı, Ahmet.; Hepbasli, A. |
| 2024 | Enhancing the Microstructure and Mechanical Properties of Cast Aluminum Matrix Composites Through Nano-Al2O3 Reinforcement via CMT and PMC Welding | Işıtan, Arzum ; Aytekin, Süleyman; Onar, Volkan |
| 2023 | Eriyik Yığma Modelleme ile Üretilen PLA Parçaların Vida Tutma Kuvvetlerinin İstatistiksel Olarak Değerlendirilmesi | Pınar, Ahmet Murat ; Ergene, Berkay ; Atlıhan, Gökmen ; Ahmet Arif Mağatlı; Kaya, Fırat; Karahan, Burak; Nişancı, Mehmet Emir |
| 2024 | Estimation of cutting forces in CNC slot-milling of low-cost clay reinforced syntactic metal foams by artificial neural network modeling | Bolat, Çağın; Özdoğan, Nuri; Coban, Sarp; Ergene, Berkay ; Akgun, İsmail Cem; Gökşenli, Ali |
| 2024 | Estimation of friction and wear properties of additively manufactured recycled-ABS parts using artificial neural network approach: effects of layer thickness, infill rate, and building direction | Bolat, Cagin; Cebi, Abdulkadir; Çoban, Sarp; Ergene, Berkay |
| 2023 | An Examination of Microstructure, Microhardness and Tribological Properties of Ceramic Reinforced Bronze Matrix Composite Materials | Ada, H.; Türkmen, E.; Kaplan, Y. ; Özçatalbaş, E.; Şatir, E.Y.; Aksöz, S. |
| 2023 | Experimental and finite element analyses on the vibration behavior of 3D-printed PET-G tapered beams with fused filament fabrication | Ergene, Berkay ; Atlihan, Gökmen ; Pinar, Ahmet Murat |
| 2024 | An experimental and numerical effort on the vibration behavior of additively manufactured recycled polyethylene terephthalate glycol components | Bolat, Cagin; Cebi, Abdulkadir; Maras, Sinan; Ergene, Berkay |
| 2021 | Experimental and numerical investigation of the thrust force and temperature generation during a drilling process | Kaplan, Yavuz ; Nalbani, Muammer |
| 2023 | An experimental examination of the dry drilling machinability features of cellular glass-filled new-generation metallic composite foamsEine experimentelle Untersuchung der Bearbeitbarkeit durch Trockenbohren von zellularen, glasgefüllten metallischen Verbundwerkstoffschäumen der neuen Generation | Bolat, C.; Ergene, B. ; Akgun, I. C.; Karakilinc, U.; Goksenli, A. |
| 2023 | Experimental Investigation of Level Indicator Errors Caused By Turbulence in Vehicle Fuel Tanks | Belli, Buse; Atalay, Öner |
| 2023 | Experimental investigation of level indicator errors caused by turbulence in vehicle fuel tanks | Belli, Buse; Atalay, Öner |
| 2021 | An experimental investigation on mechanical performances of 3D printed lightweight ABS pipes with different cellular wall thickness | Ergene, B. ; Sekeroglu, I; Bolat, C.; Yalcin, B. |
| 2022 | An Experimental Investigation on the Effect of Test Speed on the Tensile Properties of The Petg Produced By Additive Manufacturing | Ergene, Berkay ; Bolat, Çağın |
| 2022 | An experimental study on the role of manufacturing parameters on the dry sliding wear performance of additively manufactured PETG | Ergene, Berkay ; Bolat, Çağın |
| 2024 | An experimental study on the wear performance of 3D printed polylactic acid and carbon fiber reinforced polylactic acid parts: Effect of infill rate and water absorption time | Ergene, Berkay ; Inci, Yigit Emre; Cetintas, Batuhan; Daysal, Birol |
| 2021 | An experimental study on wear performance of electrolytic multilayer cu-ni-cr coated abs under different test forces | Karabeyoğlu, Sencer Süreyya; Ergene, Berkay ; Bolat, Çağın |
| 2020 | Finite Element Analyzing of the Effect of Crack on Mechanical Behavior of Honeycomb and Re-entrant Structures | Ergene, Berkay ; Yalcin, B |
| 2021 | A finite element study on modal analysis of lightweight pipes | Ergene, Berkay ; Yalcin, Bekir |
| 2021 | Formation of boride layers on a commercially pure Ti surface produced via powder metallurgy | Kaplan, Yavuz ; Gulsun, Mehmet; Aksoz, Sinan |
| 2020 | Formation of Ti-Aluminides on Commercially Pure Ti via the Hot-Dipping Aluminizing Process | Aksöz, Sinan ; Kaplan, Yavuz |
| 2009 | Free vibration analysis of the laminated composite beams by using DQM | Atlıhan, Gökmen ; Çallıoglu, Hasan ; Şahin Çonkur, Erdinç ; Topcu, M.; Yücel, U. |
| 2009 | Free vibration and buckling analysis of the laminated composite beams by using GDQM | Atlıhan, Gökmen ; Demir, Ersin ; Girgin, Zekeriya ; Çallıoglu, Hasan |
| Jul-2010 | Güneş enerjisi destekli nem almalı ısı pompalı kurutucunun tasarımı ve termodinamik analizi | Atalay, Öner |
| 2023 | Impact behavior of PET-G parts produced by fused deposition modelling depending on layer height and test temperature | Ergene, Berkay ; Ispartalı, Hasan; Karakılınç, Uçan |
| 2019 | Improvement in metallurgical properties of gravity die cast 2024-T6 aluminum alloy via cryogenic process | Tan, Engin ; Aksöz, Sinan ; Kaplan, Yavuz ; Can, Hilal ; Dışpınar, D. |
| 2014 | Improving the surface topography of mild steel with the burnishing process | Akkurt, A.; Ovalı, İsmail |
| 2024 | Influence of gradation in the reinforcement particles on the interfacial microstructure and mechanical properties of functionally graded composites | Karakoç, Halil; Çinici, Hanifi; Kumar, M. Saravana; Yılmaz, Tolga; Ovalı, İsmail ; Yang, Che-Hua; Arjunan, Arun |
| 2015 | Influence of repeated tempering on the machinability and microstructure of an AISI 52100 steel | Tan, Engin ; Ovalı, İsmail ; Mavi, A.; Kaplan, M.; Okay, S. |
| 2022 | Investigating on the machinability assessment of precision machining pumice reinforced AA7075 syntactic foam | Bolat, Cagin; Ergene, Berkay ; Karakilinc, Ucan; Goksenli, Ali |
| 2022 | Investigation effect of resistance spot welding parameters on dissimilar DP1000HF/CP800 steel joints | Kekik M.; Özen F.; Onar, Volkan ; Aslanlar S. |
| 2023 | Investigation of microstructure, mechanical, and tribological properties of SiC/h-BN/Gr hybrid reinforced Al6061 matrix composites produced by hot extrusion method | Çinici, Henifi; Karakoç, Halil; Şahin, Ömer; Ovalı, Smail |
| 2023 | Investigation of The Effect of Pre-Deformation Shape on Cold Forming Properties in The Product Material in Fastener Production | Mermer, Murat; Ovali, İsmail |
| 2022 | An investigation of the effect of tapered angle and boundary condition on natural frequency of different ceramic coated Ti-6Al-4V alloy with finite element analysis | Ergene, Berkay ; Bolat, Çağın |
| 2023 | Investigation of the effects of aging heat treatments on the mechanical and natural frequency properties of Al alloys | Aksoz, Sinan ; Arslan, Ridvan; Atlihan, Gökmen |
| 2014 | Investigation of the effects of machining parameters on the thrust force and cutting torque in the drilling of AISI D2 and AISI D3 cold work tool steels | Kaplan, Yavuz ; Okay, S.; Motorcu, A.R.; Nalbant, M. |
| 2018 | Investigation of tribological behaviours of graphene-coated journal bearing | Yildiz, Bayram; Balkanci, A.; Ovali, I. ; Ünlü, C.G. |
| 2024 | Investigation of wear, surface, metallurgical and mechanical properties of Ti6Al4V alloys coated with PVD method | Ada, Hakan; El Rubaye, Ahmed Qays Jabbar; Asikuzun Tokeser, Elif; Mavi, Ahmet; Kaplan, Yavuz ; Aksöz, Sinan |
| 2022 | An Investigation on Dimensional Accuracy of 3D Printed PLA, PET-G and ABS Samples with Different Layer Heights | Ergene, Berkay ; Bolat, Çağın |
| 2023 | Investigation on mechanical performances of various cellular structures produced with fused deposition modeling (FDM) | Ergene, Berkay ; Yalçın, Bekir |
| 2021 | An Investigation on the Effects of Boronizing Process on Microstructure and Microhardness of NiTi Alloy Produced by P/M Technique | Aksov, Sinan; Bostan, Bitlent; Kaplan, Yavuz |
| 2023 | Investigation on Wear Behavior of PETG and PLA Parts Fabricated with Fused Deposition Modelling Under Different Wear Conditions | Atlıhan, Gökmen |
| May-2017 | İmplant yapımında kullanılan Ti6Al4V titanyum alaşımının mekanik özelliklerine ve biyouyumluluğuna borlama işleminin etkisi | Kaplan, Yavuz |
| 2004 | Jeotermal sistemlerin ekserji analizi: Kızıldere örneği | Atalay, Öner |
| 2020 | KBRN tespit kara aracı prototip tasarımı ve geliştirilmesi | Kutlubay, Ramazan Çağrı ; Işıtan, Arzum |
| 2022 | KONİK AÇININ VE SINIR KOŞULLARININ 3 BOYUTLU BASKI İLE ÜRETİLEN PET-G KİRİŞLERİN DOĞAL FREKANSLARINA ETKİSİNİN ARAŞTIRILMASI | Ergene, Berkay ; Atlıhan, Gökmen ; Pınar, Ahmet |
| 2005 | Konutlarda doğal ve zorlanmış havalandırma sistemleri | Öztürk, Harun Kemal ; Yılancı, Ahmet; Atalay, Öner |
| 2015 | Laser treatment of dual matrix structured cast iron surface: Corrosion resistance of surface | Yilbas, B.S.; Toor, I.; Karatas, C.; Malik, J.; Ovalı, İsmail. |
| 2017 | Machinability analysis in drilling glass/epoxy composites with filled MWCNTs | Ovalı, İsmail ; Mavi, Ahmet |
| 2020 | Machinability evaluation of multi-directional turning tools | Pinar, Ahmet Murat ; Fırat, K. |
| 2022 | Mechanical and Microstructural Characterizations of Resistance Spot Welded Dissimilar TWIP/304L Stainless Steel | Onar, Volkan |
| 2023 | Mechanical Properties of Al2024/Al2O3/MgO/Graphite composites via hydro-thermal hot pressing route | Ovalı, Ismail ; Esen, Cemal; Albayrak, Sevda; Karakoç, Halil; Kumar, M. Saravana; Yang, Che-Hua |
| 2022 | Microcanonical ensemble based on the superstatistics with the free Hamiltonian as a stochastic variable | Chung, Won Sang; Algin, Abdullah |
| 2015 | The microstructure and hardness properties analysis of welded aluminum matrix material reinforced with sic using different currents and forms of welding | Uluköy, Arzum; Onar, Volkan ; Kaplan, Yavuz |
| 2019 | A new medium for boriding of Ti6Al4V alloy for biomedical applications | Kaplan, Yavuz ; Can, Ahmet Çetin ; Ulukoy, Arzum |
| 2020 | Nitrokarbürizasyon sonrası oksidasyon işlemlerinin AISI 4140 çeliğinin tribolojik özelliklerine etkisi | Kaplan, Yavuz ; Yıldırım, Abdulbaki; Aksöz, Sinan |
| 2017 | Optimization of machining parameters to minimize surface roughness in the turning of carbon-filled and glass fiber-filled polytetrafluoroethylene | Sancı, Mehmet Emre; Halis, Serdar ; Kaplan, Yavuz |
| 2007 | Past, present and future status of electricity in Turkey and the share of energy sources | Kemal Öztürk, Harun. ; Yılancı, Ahmet.; Atalay, Öner. |
| 2023 | Production and Tribological Investigation of Cr Borides by Boriding of Powder Metallurgy Pure Chromium Surface | Kaner S. ; Kaplan Y. ; Pamuk Ö.; Aksöz S. |
| 2019 | Production of the aa2196-tib2 MMCs via PM Technology | Tan, E. ; Kaplan, Yavuz. ; Ada, H.; Aksöz, S. |
| 2024 | q-Deformed quantum mechanics related to the Tamm-Dancoff oscillator algebra and some physical applications | Chung, W. S.; Algin, A. |
| 2022 | Rehabilitation methods for open dumps and its global applications: SMARTEnvi Eu project | Agdag, O. N. ; Cincin, R. G. Yilmaz ; Toprak, S.; Kaplan, Y. ; Degirmenci, R.; Agdag, F.; Gebes, S.; Cetin, B.; De Angelis, E.; Pikon, K.; Kujumdzieva, A.; Petrova, V.; Panaitescu, C.; Frulla, D.; Dal, O.; Balcik, C.; De Angelis, K.; Dinu, F.; Nedeva, T.; Bogacka, M. |
