Showing results 1 to 20 of 24
next >
| Issue Date | Title | Author(s) |
| 2010 | Assessment of the buckling strengths of composite plates impacted with different impact loads and points | Altan, Gürkan |
| 2007 | Calculation of residual stresses resulting from bending of cold formed steel bars | Atlihan, G ; Topcu, M ; Callioglu, H ; Altan, G |
| 2017 | Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints | Kovan, Volkan ; Altan, G. ; Topal, E.S. |
| 2010 | The effects of the butterfly joints on failure loads and fatigue performance of composite structures | Altan, Gürkan ; Topçu, Muzaffer ; Çallıoglu, Hasan |
| 2004 | Elastic-plastic and residual stress analysis of an aluminum disc under internal pressures | Bektaş, Numan Behlül ; Altan, Gürkan ; Ergun, Emin ; Demirdal, Gülabi |
| 2005 | Elastic-plastic and residual stress analysis of an aluminum metal-matrix composite disk under internal pressures | Bektaş, Numan Behlül ; Topcu, M. ; Çallıoglu, Hasan ; Altan, Gürkan |
| 2008 | Elastic-plastic thermal stress analysis of an aluminum composite disc under parabolic thermal load distribution | Altan, Gürkan ; Topçu, M. ; Bektaş, N.B.; Altan, Burçin Deda |
| 2011 | Elasto-plastic stress analysis of surface roughness effect on press fits | Kovan, Volkan ; Altan, Gürkan |
| 2010 | Experimental and numerical assessment of the improvement of the load-carrying capacities of butterfly-shaped coupling components in composite structures | Altan, Gürkan ; Topçu, Muzaffer |
| 2007 | An experimental investigation on damage loads of butterfly joints in composite structures | Topçu, Muzaffer. ; Altan, Gürkan. ; Ergun, Emin. |
| 2009 | Farklı sıcaklık ve nem etkisi altında kompozit yama ile kuvvetlendirilmiş çatlaklı malzemelerin yorulma (Çeki-Bası, Eğilme) ve kırılma mekaniği analizleri | Topcu, Muzaffer ; Ergun, Emin ; Altan, Gürkan |
| 2016 | Flexural behavior of 3D printed honeycomb sandwich structures with waste filler material | Altan, Gürkan ; Kovan, Volkan |
| 2016 | Investigation of 3D printed Savonius rotor performance | Deda Altan, Burçin ; Altan, Gürkan ; Kovan, V. |
| 2015 | An investigation on damage loads of mechanical butt joints in composite structures | Altan, Gürkan ; Topcu, Muzaffer |
| 2018 | INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES | Altan, Gürkan |
| 2004 | Kompozit disklerde termal gerilme analizi | Altan, Gürkan |
| 2013 | Mekanik alın birleştirilmiş kompozit plakaların mekanik davranışlarının statik ve dinamik olarak incelenmesi | Altan, Gürkan ; Topçu, Muzaffer |
| 2018 | Numerical and experimental analysis of a 3D printed Savonius rotor with built-in extension plate | Altan, Burçin Deda ; Kovan, V.; Altan, G. |
| 2007 | Soğuk şekillendirilmiş çelik çubukların eğilmesi durumunda oluşan artık gerilmelerin hesabı | Atlıhan, Gökmen ; Topcu, Muzaffer ; Çallıoğlu, Hasan ; Altan, Gürkan |
| 2005 | Stress analysis of curvilinearly orthotropic rotating discs under mechanical and thermal loading | Çallıoglu, Hasan ; Topçu, Muzaffer ; Altan, Gürkan |
