Please use this identifier to cite or link to this item: https://hdl.handle.net/11499/30127
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAksöz, Sinan-
dc.date.accessioned2020-06-08T12:11:20Z
dc.date.available2020-06-08T12:11:20Z
dc.date.issued2019-
dc.identifier.issn0972-2815-
dc.identifier.urihttps://hdl.handle.net/11499/30127-
dc.identifier.urihttps://doi.org/10.1007/s12666-019-01671-7-
dc.description.abstractPre-alloyed NiTi powders were pressed at 400 °C, sintered at 1250 °C for 2 h and then cooled down at the rate of 5 °C/min to room temperature inside oxygen-free furnace. Later these sintered parts were forged at ~ 1050 °C [(± 25 °C) (Forged.1: 15% and Forged.2: 30%)]. Wear behaviors of the un-forged and hot forged parts were investigated. Wear tests were carried out via a pin-on-disk wear testing device according to ASTM G132-96 standard. The wear tests were performed for various sliding distances (200 m, 400 m and 600 m) at the speed of 1.2 m/s and under different loads of 5 N, 10 N and 15 N. Vickers macro-hardness values were measured at HV2. The samples were analyzed via SEM, EDS and MAP to determine the microstructure. Wear losses, wear rates and friction coefficients were measured in detail. The results showed that the best values in terms of wear and friction coefficient were obtained for 30% hot forged sample which had a hardness value of 612 HV and a density of 5.94 g/cm3. © 2019, The Indian Institute of Metals - IIM.en_US
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFrictionen_US
dc.subjectHot forgeden_US
dc.subjectNiTi SMAen_US
dc.subjectTribologyen_US
dc.subjectWearen_US
dc.titleWear Behavior of Hot Forged NiTi Parts Produced by PM Techniqueen_US
dc.typeArticleen_US
dc.identifier.volume72en_US
dc.identifier.issue7en_US
dc.identifier.startpage1949
dc.identifier.startpage1949en_US
dc.identifier.endpage1957en_US
dc.identifier.doi10.1007/s12666-019-01671-7-
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.identifier.scopus2-s2.0-85064487249en_US
dc.identifier.wosWOS:000478635800023en_US
dc.identifier.scopusqualityQ2-
dc.ownerPamukkale University-
item.languageiso639-1en-
item.openairetypeArticle-
item.grantfulltextnone-
item.cerifentitytypePublications-
item.fulltextNo Fulltext-
item.openairecristypehttp://purl.org/coar/resource_type/c_18cf-
crisitem.author.dept20.02. Metallurgical And Materials Engineering-
Appears in Collections:Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Teknoloji Fakültesi Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Show simple item record



CORE Recommender

SCOPUSTM   
Citations

5
checked on Jun 29, 2024

WEB OF SCIENCETM
Citations

6
checked on Jul 17, 2024

Page view(s)

26
checked on May 27, 2024

Google ScholarTM

Check




Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.