Issue Date | Title | Author(s) |
2023 | Investigation of The Effect of Pre-Deformation Shape on Cold Forming Properties in The Product Material in Fastener Production | Mermer, Murat; Ovali, İsmail |
2023 | Comparison of Side Collision Analyzes of Electric Vehicle and Conventional Vehicle Chassis | Cimendag, Muhammed; Yılmaz Ulu, Eylem |
2023 | Statistical Assessment of Natural Frequency Values Obtained From Numerical Analyses in The Tapered Composite Laminated Beams | Ovali, İsmail |
2023 | Experimental Investigation of Level Indicator Errors Caused By Turbulence in Vehicle Fuel Tanks | Belli, Buse; Atalay, Öner |
2023 | Thermal Effect of Quench Rate on Mechanical Properties of Sima 7075-T6 | Güner, Ali Tekin ; Dispinar, D.; Tan, Engin |
2019 | DÖKÜM POLİAMİD (KESTAMİD)’İN AŞINMA DAVRANIŞLARINA SICAKLIĞIN ETKİSİ | Kılıç, Ezgi; Can, Hilal |
2019 | 100Cr6 Çeşitli Isıl İşlem Durumlarında Aşınma Davranışlarının Belirlenmesi | Can, Hilal |
2010 | Geri Dönüştürülmüş Kestamid Numunelerin Mekanik Özellikleri | Can, Hilal |
2018 | The Effect of Oxygen Content on Mechanical and Conductivity Properties of Copper Rods Produced by Contirod and Up-Cast Continuous Casting Methods | Kinaş, İlkay; Tan, Engin ; Can, Hilal |
2021 | Smart Decision Tools for Reducing Hazards to Our Environment and Water Resources by Rehabilitating Open Dumps | Ağdağ, Osman Nuri ; Kaplan, Yavuz ; Yılmaz Çinçin, Roda Gökçe |
2013 | Hot tear-melt quality relationship in 3xxx aluminium alloys | Çolak, Murat; Tan, Engin ; Kayıkcı, Ramazan; Dışpınar, Derya |
2023 | Experimentally Assessing the Wear Characteristics of 3D-Printed PLA and Tough PLA Materials Based on Fused Deposition Modeling | Tan, Engin |
2023 | Eriyik Yığma Modelleme ile Üretilen PLA Parçaların Vida Tutma Kuvvetlerinin İstatistiksel Olarak Değerlendirilmesi | Pınar, Ahmet Murat ; Ergene, Berkay ; Atlıhan, Gökmen ; Ahmet Arif Mağatlı; Kaya, Fırat; Karahan, Burak; Nişancı, Mehmet Emir |
2023 | Combustion and secondary atomization behavior of nanofuel droplets laden with hematite, magnetite and lanthanum orthoferrites nanoparticles | Kucukosman, Ridvan; Alper Yontar, Ahmet; Ünlü, Cumhur Gökhan ; Ocakoğlu, Kasim |
2023 | New experimental constraint on the W-185(n, & gamma;) W-186 cross section | Larsen, A. C.; Tveten, G. M.; Renstrom, T.; Utsunomiya, H.; Algin, E. ; Ari-izumi, T.; Ay, K. O.; Bello Garrote F.L.; Crespo Campo L.; Furmyr F.; Goriely S.; Görgen A.; Guttormsen M.; Ingeberg V.W.; Kheswa B.V.; Kullmann I.K.B.; Laplace T.; Lima E.; Markova M.; Midtbø J.E.; Miyamoto S.; Mjøs A.H.; Modamio V.; Ozgur M.; Pogliano F.; Riemer-Sørensen S.; Sahin E.; Shen S.; Siem S.; Spyrou A.; Wiedeking M. |
2023 | An autonomous system design for mold loading on press brake machines using a camera platform, deep learning, and image processing | Öziç, M.Ü. ; Barstuğan, M.; Özdamar, A. |
2023 | An Experimental Study of Operating Range, Combustion and Emission Characteristics in an RCCI Engine Fueled with Iso-Propanol/n-Heptane | Halis, Serdar |
2023 | The Implementation of Internal Mode Control Method to SEPIC Converter for Battery Charging Systems | Taşkıncan, Fatih Süleyman; Karaarslan, Ahmet; Ortatepe, Zafer |
2023 | Resistance spot weldability of Fe-15.4Mn-2.1Al-1.2C twinning induced plasticity steel | Özen, F.; Onar, Volkan ; Bulca, M.; Aslanlar, S. |
2023 | Numerical Investigation of a Reactivity-Controlled Compression Ignition Engine Fueled with N-Heptane and Iso-Octane | Halis, Serdar ; Solmaz, Hamit; Polat, Seyfi; Yücesu, H. Serdar |