Please use this identifier to cite or link to this item:
https://hdl.handle.net/11499/51269
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Çetin, Sevilay | - |
dc.contributor.author | Yenil, Veli | - |
dc.date.accessioned | 2023-06-13T19:15:39Z | - |
dc.date.available | 2023-06-13T19:15:39Z | - |
dc.date.issued | 2023 | - |
dc.identifier.issn | 0020-7217 | - |
dc.identifier.uri | https://doi.org/10.1080/00207217.2021.2001875 | - |
dc.identifier.uri | https://hdl.handle.net/11499/51269 | - |
dc.description.abstract | In this work, the secondary side controlled wireless power transfer (WPT) converter using a LC/S compensation topology is proposed. The constant voltage charging control mode of the proposed converter is evaluated based on high efficiency. In the secondary side, a semi-bridgeless active rectifier (SBAR) is used for the output voltage regulation. In order to improve the efficiency performance of the converter, the pulse density modulation (PDM) control method is applied to the switches of the SBAR. The primary switches operate at the constant operation frequency as independent of the secondary side. There is no communication needed between primary and secondary sides of the proposed converter. Besides, the switches of the SBAR operate with soft switching. The basic principles of the LC/S compensation network and SBAR topology are presented with steady state analysis. The PDM control strategy applied to the switches of the SBAR is discussed. In order to validate the performance of the proposed converter, a prototype is built with 8 cm air gap coreless coupling coils. The input voltage of the converter is 30 V, and its maximum output power is 60 W. The maximum efficiency is achieved as 85.26% at full load condition during CV regulation. © 2021 Informa UK Limited, trading as Taylor & Francis Group. | en_US |
dc.description.sponsorship | Pamukkale Üniversitesi, PAÜ: 2020FEBE034 | en_US |
dc.description.sponsorship | This work is supported by the [Pamukkale University] under grant [number 2020FEBE034]. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Taylor and Francis Ltd. | en_US |
dc.relation.ispartof | International Journal of Electronics | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | constant voltage control | en_US |
dc.subject | efficiency | en_US |
dc.subject | pulse density modulation control | en_US |
dc.subject | Wireless power transfer | en_US |
dc.subject | Electric rectifiers | en_US |
dc.subject | Energy transfer | en_US |
dc.subject | Inductive power transmission | en_US |
dc.subject | Pulse width modulation | en_US |
dc.subject | Topology | en_US |
dc.subject | Voltage control | en_US |
dc.subject | Voltage regulators | en_US |
dc.subject | Active rectifiers | en_US |
dc.subject | Charging control | en_US |
dc.subject | Compensation topologies | en_US |
dc.subject | Constant voltage | en_US |
dc.subject | Constant voltage control | en_US |
dc.subject | Control modes | en_US |
dc.subject | Higher efficiency | en_US |
dc.subject | Performance | en_US |
dc.subject | Pulse density modulation controls | en_US |
dc.subject | Secondary-side | en_US |
dc.subject | Efficiency | en_US |
dc.title | High efficiency constant voltage control of LC/S compensated wireless power transfer converter based on pulse density modulation control | en_US |
dc.type | Article | en_US |
dc.identifier.volume | 110 | en_US |
dc.identifier.issue | 1 | en_US |
dc.identifier.startpage | 54 | en_US |
dc.identifier.endpage | 72 | en_US |
dc.department | Pamukkale University | en_US |
dc.identifier.doi | 10.1080/00207217.2021.2001875 | - |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
dc.authorscopusid | 16024076700 | - |
dc.authorscopusid | 57204977909 | - |
dc.identifier.scopus | 2-s2.0-85119972649 | en_US |
dc.institutionauthor | … | - |
dc.identifier.scopusquality | Q2 | - |
item.fulltext | No Fulltext | - |
item.grantfulltext | none | - |
item.cerifentitytype | Publications | - |
item.openairetype | Article | - |
item.languageiso639-1 | en | - |
item.openairecristype | http://purl.org/coar/resource_type/c_18cf | - |
crisitem.author.dept | 20.03. Biomedical Engineering | - |
crisitem.author.dept | 27.01. Electronics and Automation | - |
Appears in Collections: | Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection Teknoloji Fakültesi Koleksiyonu Çardak Organize Sanayi Bölgesi Meslek Yüksekokulu Koleksiyonu |
CORE Recommender
SCOPUSTM
Citations
2
checked on Oct 13, 2024
Page view(s)
52
checked on Aug 24, 2024
Google ScholarTM
Check
Altmetric
Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.