Showing results 1 to 20 of 33
next >
| Issue Date | Title | Author(s) |
| 2023 | AA2024 ve AA7075 alüminyum alaşımlarında kesintili yaşlandırma prosesinin mekanik özelliklere etkisinin incelenmesi | Yıldız, Rüçhan |
| 2011 | Alüminyum alaşımlarında blister oluşumu | Tan, Engin |
| 2011 | Blistering problems observed in strain induced melt activated aluminium alloys | Tan, Engin ; Tarakçılar, Ali Rıza ; Dispinar, D. |
| 2023 | Change in the Wear Characteristics of T6 Heat-Treated 2024, 6063, and 7075 Alloys at Different Quenching Temperatures | Tan, Engin |
| 2022 | A Comparative Investigation on the Wear Performance of Compacted Graphite Iron (CGI) Treated with Single and Double Tempering | Tan, Engin |
| 2019 | Comparison of the effects of b4C and SiC Reinforcement in Al-Si Matrix Alloys Produced via PM Method | Kaplan, Y. ; Tan, Engin. ; Ada, H.; Aksöz, Sinan. |
| 2018 | Comparison of the fatigue life of PA 6 gears | Can, Hilal ; Tan, Engin |
| 2012 | Correlation between melt quality and fatigue properties of 2024, 6063 and 7075 | Tan, Engin ; Tarakçılar, Ali Rıza ; Dispinar, D. |
| 2012 | Defect analysis by casting simulation software in rolling roll manufactured by GGG70 | Tan, Engin ; Tarakcilar, A.R. ; Dispinar, D. |
| 2012 | Defect analysis by casting simulation software in rolling roll manufactured by GGG70 [Conference Paper] | Tan E. ; Tarakcilar A.R. ; Dispinar D. |
| 2005 | Dökme demirden imal edilen hadde merdanelerinin aşınma davranışına bakır katkı oranının etkisi | Tan, Engin |
| 2025 | Effect of Fe, Cr and Mn Addition on the Microstructure and Mechanical Properties on Casting Process of A356 Alloy | Tansel, Alperen |
| 2012 | Effect of melt quality and quenching temperature on the mechanical properties of SIMA 2024 and 7075 | Tan, Engin ; Tarakçılar, Ali Rıza ; Dispinar, D. |
| 2015 | The effect of melt quality and quenching temperature on the Weibull distribution of tensile properties in aluminium alloys | Tan, Engin ; Tarakçılar, Ali Rıza ; Dispinar, D. |
| 2018 | The Effect of Oxygen Content on Mechanical and Conductivity Properties of Copper Rods Produced by Contirod and Up-Cast Continuous Casting Methods | Kinaş, İlkay; Tan, Engin ; Can, Hilal |
| 2022 | The Effect of Vacuum Carburizing on the Mechanical and Wear Properties of Fe-C-Cu Composite Materials Produced via Powder Metallurgy | Pamuk, Ozer; Kaplan, Yavuz ; Tan, Engin ; Aksoz, Sinan |
| 2023 | Eriyik Yığma Modellemeye Dayalı 3b Baskılı Pla ve Tok Pla Malzemelerinin Aşınma Özelliklerinin Deneysel Olarak Değerlendirilmesi | Tan, Engin |
| 2023 | Experimentally Assessing the Wear Characteristics of 3D-Printed PLA and Tough PLA Materials Based on Fused Deposition Modeling | Tan, Engin |
| 2013 | Hot tear-melt quality relationship in 3xxx aluminium alloys | Çolak, Murat; Tan, Engin ; Kayıkcı, Ramazan; Dışpınar, Derya |
| 2019 | Improvement in metallurgical properties of gravity die cast 2024-T6 aluminum alloy via cryogenic process | Tan, Engin ; Aksöz, Sinan ; Kaplan, Yavuz ; Can, Hilal ; Dışpınar, D. |
