| Issue Date | Title | Author(s) |
| 2021 | Tribological and Aging Behavior of Hybrid Al 7075 Composite Reinforced with B4C, SiC, and TiB2 | Aksoz, S. ; Kaner, S. ; Kaplan, Y. |
| 2022 | High-efficiency LC-S compensated wireless power transfer charging converter for implantable pacemakers | Çetin, Sevilay ; Demirci, Yunus Emre |
| 2021 | Development of a Novel Nanoarchitecture of the Robust Photosystem I from a Volcanic Microalga Cyanidioschyzon merolae on Single Layer Graphene for Improved Photocurrent Generation | Izzo, Miriam; Jacquet, Margot; Fujiwara, Takayuki; Harputlu, Ersan; Mazur, Radoslaw; Wrobel, Piotr; Goral, Tomasz; Unlu, C. Gokhan |
| 2021 | Hybrid Steel Sheet Trends for Automotive Stampings | Kardes Sever, Nimet |
| 2022 | Investigating on the machinability assessment of precision machining pumice reinforced AA7075 syntactic foam | Bolat, Cagin; Ergene, Berkay ; Karakilinc, Ucan; Goksenli, Ali |
| 2021 | Preparation of Zinc (II) phthalocyanine-based LB thin film: Experimental characterization, the determination of some optical properties and the investigation of the optical sensing ability | Acikbas, Yaser; Erdogan, Matem; Capan, Rifat; Ozkaya, Cansu; Baygu, Yasemin ; Kabay, Nilgun ; Gok, Yasar |
| 2022 | Implementation of constant current and constant voltage charging control of a wireless charging converter | Çetin, Sevilay ; Yenil, Veli |
| 2021 | Fissure Ridges: A Reappraisal of Faulting and Travertine Deposition (Travitonics) | Brogi, Andrea; Capezzuoli, Enrico; Karabacak, Volkan; Alcicek, Mehmet Cihat ; Luo, Lianchao |
| 2021 | A New Simulated Grounded Inductor Based on Two NICs, Two Resistors and a Grounded Capacitor | Yuce, E. ; Alpaslan, H. ; Minaei, S.; Ayten, U. E. |
| 2021 | Constant Voltage Control of A Double Sided LCC Compensated IPT Converter Based On Pulse Density Modulation | Yenil, Veli ; Çetin, Sevilay |
| 2021 | Performance Evaluation of Wireless Power Transfer Compensation Topologies for Active Implantable Medical Devices | Çetin, Sevilay ; Demirci, Yunus Emre; Yenil, Veli |
| 2021 | Speciation and preconcentration of chromium in real samples by magnetic polythiophene nanoparticle solid-phase extraction (SPE) coupled with microsampling injection - flame atomic absorption spectrometry (FAAS) | Elyas Sodan, Nilgun; Elci, Sukru Gokhan ; Arslan Kartal, Aslihan ; Hol, Aysen ; Elci, Latif |
| 2021 | Formation of boride layers on a commercially pure Ti surface produced via powder metallurgy | Kaplan, Yavuz ; Gulsun, Mehmet; Aksoz, Sinan |
| 2021 | Enhancement of direct electron transfer in graphene bioelectrodes containing novel cytochrome c(553) variants with optimized heme orientation | Izzo, Miriam; Osella, Silvio; Jacquet, Margot; Kiliszek, Malgorzata; Harputlu, Ersan; Starkowska, Alicja; Lasica, Anna; Unlu, C. Gokhan ; Uspienski, Tomasz; Niewiadomski, Pawel; Bartosik, Dariusz; Trzaskowski, Bartosz; Ocakoglu, Kasim; Kargul, Joanna |
| 2021 | Selective glucose dehydration over novel metal phthalocyanine catalysts at low temperatures | Kilic, Hulya A.; Kilic, Emre; Kabay, Nilgun ; Baygu, Yasemin ; Gok, Yasar |
| 2022 | Constant voltage control of a secondary side controlled wireless power transfer converter using LC/S compensation | Yenil, Veli ; Çetin, Sevilay |
| 2022 | Simulation of the production of Inconel 718 and Ti6Al4V biomedical parts with different relative densities by selective laser melting (SLM) method | Ergene, Berkay |
| 2022 | An FPGA-Based Comparative Analysis of Control Techniques for Gimbals and Fins of Missiles | Ozev, Murat; Ortatepe, Zafer ; Karaarslan, Ahmet |
| 2022 | The in vitro effect of hypochlorous acid-metal nanoparticles combination on Salmonellaunder different temperature conditions | Buyukunal, Serkan Kemal; Muratoglu, Karlo; Koluman, Ahmet |
| 2021 | Validation of HPLC method for the determination of chemical and radiochemical purity of a Ga-68-labelled EuK-Sub-kf-(3-iodo-y-) DOTAGA | Uğur, Ayşe; Elçi, Şükrü Gökhan ; Yüksel, Doğangün |
