Showing results 1 to 100 of 118
next >
| Issue Date | Title | Author(s) |
| 2005 | Alternatif dizel motor yakıtı olarak biyodizel ve etanolün karşılaştırılması | Usta, Nazım ; Can, Özer ; Öztürk, Erkan |
| 2010 | Analysis of a photovoltaic-fuel cell hybrid energy system in terms of electromagnetic pollution | Ulu, Eylem Yılmaz ; Çetin, Engin ; Karakılınç, Özgür Önder ; Yılancı, Ahmet; Kemal Öztürk, Harun |
| Jan-2016 | Araç kullanım sürelerinin motor yağ viskozitesine etkisinin deneysel olarak incelenmesi | Halis, Serdar |
| 2021 | Artificial Neural Network Based Determination of the Performance and Emissions of a Diesel Engine Using Ethanol-Diesel Fuel Blends | Can, Özer ; Öztürk, Erkan ; Arcaklıoğlu, Erol |
| 2006 | Artificial neural network based modeling of performance characteristics of deep well pumps with splitter blade | Gölcü, Mustafa |
| 2022 | Artificial neural networks modeling of combustion parameters for a diesel engine fueled with biodiesel fuel | Can, Ozer ; Baklacioglu, Tolga; Ozturk, Erkan ; Turan, Onder |
| 2005 | Artificial neural-network based modeling of variable valve-timing in a spark-ignition engine | Gölcü, Mustafa ; Sekmen, Y.; Erduranli, P.; Salman, M.S. |
| 2023 | B-pillar design optimization under a crushing load | Öztürk, İsmail ; Başkara, Tayfun |
| 2005 | Buji ile ateşlemeli motorlarda sıkıştırma oranı değişiminin performans parametrelerine etkisi | Sekmen, Yakup; Erduran, Perihan; Gölcü, Mustafa ; Salman, M. Sahir |
| 2016 | Combined effects of soybean biodiesel fuel addition and EGR application on the combustion and exhaust emissions in a diesel engine | Can, Özer ; Öztürk, Erkan ; Solmaz, H.; Aksoy, F.; Çinar, C.; Yücesu, H.S. |
| 2017 | Combustion and exhaust emissions of canola biodiesel blends in a single cylinder DI diesel engine | Can, Özer ; Öztürk, Erkan ; Yücesu, H.S. |
| 2016 | Combustion and performance characteristics of an HCCI engine utilizing trapped residual gas via reduced valve lift | Çinar, C.; Uyumaz, A.; Polat, S.; Yilmaz, E.; Can, Özer ; Solmaz, H. |
| 2022 | Combustion characteristics of naphtha and n-heptane fuels in an auto-ignited HCCI engine at different lambda values and engine loads | Calam A.; Halis S. ; Aydoğan B.; Haşimoğlu C. |
| 2014 | Combustion characteristics, performance and exhaust emissions of a diesel engine fueled with a waste cooking oil biodiesel mixture | Can, Özer |
| 2005 | Combustion of bioDiesel fuel produced from hazelnut soapstock/waste sunflower oil mixture in a Diesel engine | Usta, Nazım ; Öztürk, Erkan ; Can, Özer ; Çonkur, Erdinç Şahin ; Nas, Sebahattin ; Çon, Ahmet Hilmi ; Can, A.Ç. |
| 2022 | A Comparative Analysis of Model Predictive Control-Based Isolated 5-Level Multi-level Inverter with Minimum Number of Switches | Ortatepe, Zafer |
| 2023 | A Comparison of Digital Constant On-Time and Variable On-Time Control in Buck/Buck-Boost PFC Converter | Ortatepe, Zafer |
| 2016 | A comparison of performance and exhaust emissions with different valve lift profiles between gasoline and LPG fuels in a SI engine | Çinar, C.; Şahin, F.; Can, Özer ; Uyumaz, A. |
| 2023 | Comparison of Side Collision Analyzes of Electric Vehicle and Conventional Vehicle Chassis | Cimendag, Muhammed; Yılmaz Ulu, Eylem |
| 2005 | Comparsion of biodiesel and ethanol as an alternative diesel engine fuel | Usta, Nazım ; Can, Özer ; Öztürk, Erkan |
| 2024 | Contribution of regenerative suspension module to charge efficiency and range in hydrogen fuel cell electric vehicles | Tuncer, D.; Yilmaz, Ulu, E. |
| 2023 | A Control Scheme for a Quasi-Z Source Three-Phase Inverter | Ortatepe, Zafer ; Özdemir, Sadık |
| 2022 | Coupled Inductor Based Buck PFC Converter for Elimination of Dead Zones | Ortatepe, Z. ; Karaarslan, A.; Akgül, H. |
| 2024 | Coupled inductor-based buck power factor correction (PFC) converter with soft switching | Ortatepe, Zafer ; Karaarslan, Ahmet; Akgul, Hüseyin |
| 2022 | Crashworthiness design of heat treated vehicle parts with tailored properties | Ozturk, Ismail |
| 2009 | Daily means ambient temperature prediction using artificial neural network method: A case study of Turkey | Altan Dombaycı, Ömer ; Gölcü, Mustafa |
| 2001 | Dalgıç pompalarda çarka ara kanatçık ilavesinin verime etkisinin analizi | Gölcü, Mustafa |
| 2006 | Denizli için optimum yalıtım kalınlığının enerji tasarrufuna etkisi ve sonuçları | Gölcü, Mustafa ; Dombaycı, Ömer Altan ; Abalı, Semra |
| 2022 | Design and optimisation of hybrid material bumper beams under impact loading | Öztürk, İ. |
| 2021 | Design of multi-cell tailored property columns under oblique loading | Öztürk, İsmail |
| 2008 | Dizel motorlar için yenilenebilir alternatif biyodizel yakıt geliştirilmesi | Usta, Nazım ; Çon, Ahmet Hilmi ; Uğuzdoğan, Erdal ; Aydoğan, Bilal; Can, Özer ; Öztürk, Erkan |
| 2012 | Dynamic and vibration analysis of a single cylinder diesel engine | Öztürk, Erkan ; Karabulut, H. |
| 2006 | The effect and results of the optimum insulation thickness on energy saving for Denizli | Gölcü, Mustafa ; Dombaycı, Ömer Altan ; Abali, S. |
| 2005 | The effect of compression ratio variations on the engine performance parametres in spark ignition engines | Sekmen, Y; Erduranli, P; Gölcü, Mustafa ; Salman, MS |
| 2022 | Effect of heat-treatment on crash performance in bumper beam and crash box design and optimization of the system | Ozturk, Ismail ; Kaya, Burak Sercan |
| 2014 | The effect of heating and cooling temperatures on rapid cooling time and particle number in auto glass tempering process | Akçay, Mehmet ; Sekmen, Y.; Gölcü, Mustafa |
| 2023 | The Effect of Hot Rolling Temperature on the Wear Properties of NiTi Rods | Aksoz, Sinan ; Arslan, Ridvan; Kardes Sever, Nimet ; Kaplan, Yavuz ; Bostan, Bulent |
| 2020 | Effect of operating parameters on performance and emissions of a diesel engine fueled with ternary blends of palm oil biodiesel/diethyl ether/diesel by Taguchi method | Uslu, S; Aydın, Mustafa |
| 2017 | Effects of blade discharge angle, blade number and splitter blade length on deep well pump performance | Korkmaz, E.; Gölcü, Mustafa ; Kurbanoğlu, C. |
| 2023 | Effects of Different Dissolution and Aging Heat Treatments on Metallographic and Mechanical Properties of NiTi Based Sheets | Aksoz, Sinan ; Arslan, Ridvan; Kardes Sever, Nimet ; Bostan, Bulent |
| 2022 | Effects of EGR, injection retardation and ethanol addition on combustion, performance and emissions of a DI diesel engine fueled with canola biodiesel/diesel fuel blend | Ozturk, Erkan ; Can, Ozer |
| 2004 | Effects of ethanol addition on performance and emissions of a turbocharged indirect injection Diesel engine running at different injection pressures | Can, Özer ; Çelikten, I.; Usta, Nazım. |
| 2005 | Effects of ethanol blended diesel fuel on exhaust emissions from a diesel engine | Can, Özer ; Celikten, I; Usta, Nazım |
| 2023 | Effects of intake air temperature on energy, exergy and sustainability analyses in an RCCI engine fueled with iso-propanol and n-heptane | Halis, S. ; Doğan, Battal |
| 2022 | Effects of material failure criteria on design of vehicle parts under impact loading | Öztürk, İsmail ; Kaya, N.; Öztürk, F. |
| 2023 | Effects of Premixed Ratio on Engine Operation Range and Emissions of a Reactivity Controlled Compression Ignition Engine | Sahin F.; Halis S. ; Ylldlrlm E.; Altln M.; Balaban F.; Solmaz H.; Yücesu H.S. |
| 2020 | Effects of retarded fuel injection timing on combustion and emissions of a diesel engine fueled with canola biodiesel | Öztürk, Erkan ; Can, Özer ; Usta, Nazım ; Yücesu, H.S. |
| 2002 | Endüstriyel hidrolikte biriktiriciler ve kullanım devreleri | Gölcü, Mustafa |
| 2017 | Energy management system optimization for battery- ultracapacitor powered electric vehicle | Köroglu, Selim ; Demirçalı, Akif ; Kesler, Selami ; Sergeant, P.; Öztürk, Erkan ; Tümbek, Mustafa |
| 2012 | Energy saving by using an axial flow deep well pump: An application in the net frames in Lake Karacaören -2 | Gölcü, Mustafa ; Köseoglu, Mehmet Fevzi |
| 2006 | Energy saving in a deep well pump with splitter blade | Gölcü, Mustafa ; Pancar, Yaşar; Sekmen, Yakup |
| 2005 | Etanol karışımlı motorin yakıtın diesel motoru egzoz emisyonlarına etkisi | Can, Özer ; Çelikten, İsmet; Usta, Nazım |
| 2011 | Exergy analysis and environmental impact assessment of a photovoltaic-hydrogen production system | Yılancı, Ahmet; Öztürk, Harun Kemal ; Dincer, I.; Ulu, Eylem Yılmaz ; Çetin, Engin ; Ekren, O. |
| 2022 | Exergy analysis in a HCCI engine operated with diethyl ether-fusel oil blends | Zapata-Mina, Juan; Ardebili, Seyed Mohammad Safieddin; Restrepo, Alvaro; Solmaz, Hamit; Calam, Alper; Can, Ozer |
| 2010 | Exergy analysis of a solar-hydrogen hybrid energy system | Yılmaz Ulu, Eylem ; Özturk, Harun Kemal |
| 2022 | Experimental Combustion Analysis of a Small Size Diesel Engine Fueled With Tire Derived Fuel/Diesel Fuel Blends | Dogan, Oğuzhan ; Aydın, Mustafa |
| 2023 | Experimental Investigation of the Effects of Gasoline-Methyl Ethyl Ketone Fuel Blends on Engine Performance and Exhaust Emissions | Kocakulak, Tolga; Uyumaz, Ahmet; Arabaci, Emre ; Dağoğlu, Yusuf; Çamoğlu, Celal |
| 2015 | Experimental investigation of transient temperature distribution and heat transfer by jet impingement in glass tempering processing | Yazıcı, Hilmi; Akçay, Mehmet ; Gölcü, Mustafa ; Köseoğlu, Mehmet Fevzi ; Sekmen, Y. |
| 2014 | Experimental investigation of wet viol dryability with microwave | Gölcü, Mustafa ; Şen, Fatih |
| 2023 | An Experimental Study of Operating Range, Combustion and Emission Characteristics in an RCCI Engine Fueled with Iso-Propanol/n-Heptane | Halis, Serdar |
| 2024 | An Extendable Zeta Converter Based Grid-Connected Multilevel Inverter with Model Predictive Control Method | Ortatepe, Z. ; Aksoz, S. |
| 2002 | Fit values of M subshell fluorescence yields and Coster-Kronig transitions for elements with 20 ? Z ? 90 | Sögüt, Ö.; Büyükkasap, E.; Küçükönder, A.; Ertugrul, M.; Dogan, O. ; Erdogan, Hasan; Şimşek, Ö. |
| 2022 | An FPGA-Based Comparative Analysis of Control Techniques for Gimbals and Fins of Missiles | Ozev, Murat; Ortatepe, Zafer ; Karaarslan, Ahmet |
| 2023 | Genetic Algorithm based PID Tuning Software Design and Implementation for a DC Motor Control System | Ortatepe, Zafer |
| 2021 | A gravitational torque-compensated 2-DOF planar robotic arm design and its active control | Bulut, Yalcin ; Conkur, Erdinc Sahin |
| Nov-2010 | Güneş-hidrojen hibrit enerji sisteminin deneysel ve teorik enerji, ekserji ve elektromanyetik analizi | Ulu, Eylem Yılmaz |
| 2020 | Hiper gereğinden çok serbestlik dereceli yılansı robotlar için yol planlama algoritması ve kontrol yöntemi geliştirilmesi | Bulut, Yalçın |
| 2021 | Hybrid Steel Sheet Trends for Automotive Stampings | Kardes Sever, Nimet |
| 2023 | The Implementation of Internal Mode Control Method to SEPIC Converter for Battery Charging Systems | Taşkıncan, Fatih Süleyman; Karaarslan, Ahmet; Ortatepe, Zafer |
| 2022 | Implementation of Sliding Mode Control Method for Switched-Inductor Quasi-Z-Source Inverter | Özkara, O.; Ortatepe, Z. ; Karaarslan, A. |
| 2018 | Influence of the temperature on energy management in battery-ultracapacitor electric vehicles | Demircalı, A.; Sergeant, P.; Koroglu, S.; Kesler, S. ; Öztürk, Erkan ; Tumbek, M. |
| 2022 | Investigation of the effects of intake manifold pressure on performance and combustion characteristics in an HCCI engine | Solmaz, Hamit; Calam, Alper; Halis, Serdar ; Ipci, Duygu; Yilmaz, Emre |
| 2024 | Investigation of the performance of cathode supported solid oxide fuel cell with energy and exergy analysis at different operating temperatures | Halis, Serdar ; Atak, Nisa Nur; Doğan, Battal |
| 2022 | Isolated seven-level inverter for grid-connected power systems with predictive control method | Ortatepe, Zafer |
| 2008 | İşletmelerde ileri teknoloji kullanımı ve rekabet: otomotiv sektöründe bir alan araştırması | Demirci, Rasih; Semiz, Süleyman; Gölcü, Mustafa |
| Dec-2015 | Lineer aktüatörlü paralel modüllerden oluşan seri robotun kontrolü | Bulut, Yalçın |
| 2022 | Material characterisation for strength and formability limits of DP 1180 sheet | Sever, Nimet Kardes |
| 2003 | Measurement of diffusion coefficients of Ag in YBa2Cu 3O7 by the EDXRF technique | Dogan, O. ; Ertugrul, M.; Çevik, U.; Bacaksiz, E.; Tiraşoglu, E.; Kobya, A.I.; Erdogan, Hasan |
| 1997 | Measurement of probabilities for vacancy transfer from the K to L shell of the elements 73?Z?92 | Ertugrul, M.; Dogan, O. ; ¸Sim¸sek, Ö.; Turgut, Ü.; Erdogan, Hasan |
| 2001 | Measurement of the enhancement effect in different sample series in X-ray fluorescence analysis | Tirasoglu, E.; Dogan, O. ; Çevik, Uğur; Ertugrul, M.; Erdogan, H. |
| 2016 | miR-548a-3p, miR-548as-3p and miR-8078 are responsible for NSCLC invasion | Akgün, Şakir ; Kucuksayan, H; Tokgün, Onur ; Karagur, ER; Can, O ; Akça, Hakan |
| 2014 | MİKRODALGA İLE ISLAK VİYOLÜN KURUTULABİLİRLİĞİNİN DENEYSEL OLARAK İNCELENMESİ | Gölcü, Mustafa ; Şen, Fatih |
| 2022 | Multi-objective optimization of DI diesel engine performance and emission parameters fueled with Jet-A1 – Diesel blends | Safieddin Ardebili S.M.; Babagiray M.; Aytav E.; Can Ö. ; Boroiu A.-A. |
| 2016 | Mutation analysis in BRCA1 and BRCA2 genes by Sanger sequencing and determination the relation between breast cancer in a small Turkish population | Can, O ; Dogu, Gamze Gököz ; Değirmencioğlu, Serkan ; Akça, Hakan |
| 2015 | Nano-karbon ile güçlendirilmiş cam elyaf takviyeli kompozit malzeme üretimi ve mekanik özelliklerinin tespiti | Tekin, Furkan |
| 2024 | NiTi+Nd tozlarının mekanik öğütme sonrası boro-sinterleme yöntemi ile numune üretimi ve karakterizasyonu | Karabudak, Ceylan; Kardeş Sever, Nimet ; Aksöz, Sinan |
| 2024 | Numerical analysis of the effects of fuel injection duration and spray angle on the combustion process in a compression ignition engine | Balaban, Fethi; Halis, Serdar ; Yücesu, H. Serdar |
| 2023 | Numerical Investigation of a Reactivity-Controlled Compression Ignition Engine Fueled with N-Heptane and Iso-Octane | Halis, Serdar ; Solmaz, Hamit; Polat, Seyfi; Yücesu, H. Serdar |
| 2024 | Numerical investigation of energy absorption performance in thin-walled structure under three-point bending test | Halis, S. ; Altin, M. |
| 2019 | Numerical investigation of the spray characteristics in an outwardly-opening piezoelectric gasoline injector for different ambient conditions | Taş, İbrahim ; Karamangil, Mehmet İhsan |
| 2022 | Numerical Study of the Effects of Lambda and Injection Timing on RCCI Combustion Mode | Halis, S. ; Solmaz, H.; Polat, S.; Yücesu, H.S. |
| 2022 | Optimization of a B-Pillar with Tailored Properties Under Impact Loading | Öztürk, İsmail |
| 2023 | Optimization of a novel drive mechanism approaching the ideal cycle for beta type Stirling engines | Öztürk, Erkan |
| 2006 | Optimization of insulation thickness for external walls using different energy-sources | Dombaycı, Ömer Altan ; Gölcü, Mustafa ; Pancar, Y. |
| 2017 | Optimization of machining parameters to minimize surface roughness in the turning of carbon-filled and glass fiber-filled polytetrafluoroethylene | Sancı, Mehmet Emre; Halis, Serdar ; Kaplan, Yavuz |
| 2011 | Oto cam temperleme deney düzeneğinin kurulumu ve ısıtma-soğutma sürelerinin tayini için örnek bir uygulama | Yazıcı, Hilmi; Akçay, Mehmet ; Gölcü, Mustafa ; Köseoğlu, Mehmet Fevzi ; Sekmen, Yakup |
| 2012 | Oto cam temperleme işleminde optimum soğutma ünitesi konfigürasyonunun belirlenmesi | Gölcü, Mustafa ; Çallıoğlu, Hasan ; Sözbir, Nedim |
| 2014 | OTO CAM TEMPERLEME İŞLEMİNDE ISITMA VE SOĞUTMA SICAKLIKLARININ ANİ SOĞUTMA SÜRESİNE VE PARÇACIK SAYISINA ETKİSİ | Akçay, Mehmet ; Sekmen, Yakup; Gölcü, Mustafa |
| 2017 | Performance analysis of a concentrated solar energy for lighting-power generation combined system based on spectral beam splitting | Kandilli, C.; Külahlı, Gürhan |
| 2020 | Performance and emission prediction of a compression ignition engine fueled with biodiesel-diesel blends: A combined application of ANN and RSM based optimization | Aydın, Mustafa ; Uslu, S.; Bahattin Çelik, M. |
